How to: Enable fog lights with high beams

This option will allow fog lights to stay on with high beams. By design this option is disabled. This option is only intended to use outside of public roads.

Important tip!

* When you change settings Engine must be OFF and ignition set to RUN position

* When you try to test start car use emergency brake and turn on booth Fog lights and High Beams

Disable Front Fog Lights Dropout

1

Slide to adaptation section and locate Vehicle user settings

2

Now we have a full list of available adaptations. Locate Front Fog Light Dropout On/Off option.

3

Choose Deactivated and start ECU update by pressing “GO”

Now it’s time to test your lights

When procedure is completed turn ignition to off leave the car and close the car for 5 min. All computers should now go to sleep.

After 5 min, start the car and turn on Front Fog Lights and High Beams at the same time.